1. |
ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-99) and Commentary (ACI 318R-99), American Concrete Institute, Detroit, 1999. |
2. |
Hwang, S.-J., Lu, W.-Y., and Lee, H.-J., "Shear Strength Prediction for Deep Beams," ACI Journal, Proceedings, Vol. 97, No. 3, May-June, 2000, pp. 367-376. |
3. |
Kuchma, D. A., and Kim, K. S., Shear Data Bank Website, www.cee.uiuc.edu/kuchma/sheardatabank. |
4. |
Schlaich, J., and Weischede, D., Detailing of Concrete Structures (in German), Bulletin d’Information 150, Comité Euro-International du Béton, Paris, March 1982, 163 pp. |
5. |
Schlaich, J., Schäfer, K., and Jennewein, M., "Toward a Consistent Design of Structural Concrete,"Journal of the Prestressed Concrete Institute, Vol. 32, No. 3, May-June 1987, pp. 74-150. |
6. |
Marti, P., "Basic Tools of Reinforced Concrete Beam Design," ACI Journal, Proceedings, Vol. 82, No. 1, January-February 1985, pp. 45-56. |
7. |
MacGregor, J. G., Reinforced Concrete: Mechanics and Design, Prentice-Hall, Inc., Englewood Cliffs, New Jersey, 3rd ed., 1997, 939 pp. |
8. |
Collins, M. P., and Mitchell, D., Prestresed Concrete Structures, Prentice-Hall, Inc., Englewood Cliffs, New Jersey, 1991, 766 pp. |
9. |
Mitchell, D., and Cook, W. D., "Design of Disturbed Regions," IABSE Colloquium Stuttgart 1991: Structural Concrete, International Association for Bridge and Structural Engineering, March 1991, pp. 533-538. |
10. |
CEB-FIP Model Code 1990, Thomas Telford Services, Ltd., London, for Comité Euro-International du Béton, Laussane, 1993, 437 pp. |
11. |
FIP Commission 3, FIP Recommendation 1996, Practical Design of Structural Concrete, Fédération Internationale de la Precontrainte, May 1998. |
12. |
CSA Technical Committee on Reinforced Concrete Design, A23.3-94 Design of Concrete Structures, Canadian Standards Association, Rexdale, Ontario, December 1994, 199 pp. |
13. |
American Association of State Highway and Transportation Officials,
LRFD Bridge Design Specification and Commentary, 1st Edition, Washington, DC, 1994. |
14. |
MacGregor, J. G., and ACI Committee 318E (Shear and Torsion), Appendix X and CE49: Strut-and-Tie Models, draft of code and commentary to be considered for 2002 ACI Building Code, June, 2000, approx. 30 pp. |
15. |
Bergmeister, K., Breen, J. E., Jirsa, J. O., Kreger, M. E., "Detailing for Structural Concrete," Research Report 1127-3F, Center for Transportation Research, Bureau of Engineering Research, University of Texas at Austin, May 1993, 300 pp. |
16. |
ACI Committee 445 – Shear and Torsion, Strut-and-Tie Bibliography, ACI Bibliography No. 16, ACI International, September 1997, 50 pp. |
17. |
Kuchma, D. A., "Design Using the Strut-and-Tie Model: Tests of Large-Scale Pile Caps," M.A.Sc. Thesis, Department of Civil Engineering, University of Toronto, April 1989, 137 pp. |
18. |
Adebar, P., and Zhou, Z., "Design of Deep Pile Caps Using Strut-and-Tie Models," University of British Columbia, Vancouver, BC, Canadian Conference, Restructuring: America and Beyond Structures Congress, Proceedings of the 13th Structures Congress Part 2 (of 2), Boston, MA, USA, ASCE, New York, NY, USA, pp. 1623-1626. |
19. |
Adebar, P., and Zhou, Z., "Bearing Strength of Compressive Struts Confined by Plain Concrete," ACI Structural Journal, Vol. 90, No. 5, September-October 1993, pp. 534-541. |
20. |
Adebar, P., Kuchma, D., and Collins, M. P., "Strut-and-Tie Models for the Design of Pile Caps: an Experimental Study," ACI Structural Journal, Vol. 87, No. 1, January-February 1990, pp. 81-92. |
21. |
Bhide, S. B., and Collins, M. P., "Influence of Axial Tension on the Shear Capacity of Reinforced Concrete Members," ACI Structural Journal, Vol. 86, No. 5, September-October 1989, pp. 570-581. |
22. |
Belarbi, A., and Hsu, T. T. C., "Constitutive Laws of Concrete in Tension and Reinforcing Bars Stiffened by Concrete," ACI Structural Journal, Vol. 91, July-August 1994, pp. 465-474. |
23. |
Lee, D. D. K., "An Experimental Investigation in the Effects of Detailing on the Shear Behaviour of Deep Beams," M.A.Sc. Thesis, Department of Civil Engineering, University of Toronto, 1982, 138 pp. |
24. |
Polla, M., "A Study of Nodal Regions in Strut-and-Tie Models," M.A.Sc. Thesis, Department of Civil Engineering, University of Toronto, 1992, 130 pp. |
25. |
Barton, D. L., Anderson, R. B., Bouadi, A., Jirsa, J. O., Breen, J. E., "Investigation of Strut-and-Tie Models for Dapped Beam Details," Research Report 1127-1, Center for Transportation Research, Bureau of Engineering Research, University of Texas at Austin, May 1991, 187 pp. |
26. |
Jirsa, J. O., Breen, J. E., Bergmeister, K., Barton, D., Anderson, R., and Bouadi, H., "Experimental Studies of Nodes in Strut-and-Tie Models," IABSE Colloquium Stuttgart 1991: Structural Concrete, International Association for Bridge and Structural Engineering, Zürich, 1991, pp. 525-532. |
27. |
Chen, W. F., Plasticity in Reinforced Concrete, McGraw-Hill Co., New York, 1982, 474 pp. |
28. |
Nielsen, M. P., Limit Analysis and Concrete Plasticity, Prentice-Hall, Inc., Englewood Cliffs, New Jersey, 1984, 420 pp. |
29. |
Thürlimann, B., "Plastic Analysis of Reinforced Concrete Beams," IABSE Colloquium on Plasticity in Reinforced Concrete, Copenhagen 1979, Introductory Report, International Association for Bridge and Structural Engineering, Vol. 28, Zürich, October 1978, pp. 71. |
30. |
Rogowsky, D. M., and MacGregor, J. G., "Design of Reinforced Concrete Deep Beams," Concrete International, Vol. 8, No. 8, August 1986, pp. 49-58. |
31. |
Abdalla, K. M., Alshegeir, A., and Chen, W. F., "Analysis and Design of Mushroom Slabs with a Strut-Tie Model," Computers and Structures, Vol. 58, No. 2, January 1996, pp. 429-434. |
32. |
Alshegeir, A., and Ramirez, J., "Computer Graphics in Detailing Strut-Tie Models," Journal of Computing in Civil Engineering, ASCE, Vol. 6, No. 2, April 1992, pp. 220-232. |
33. |
Benabdallah, S., Ramirez, J. A., and Lee, R. H., "Computer Graphics in Truss-Model Design Approach," Journal of Computing in Civil Engineering, ASCE, Vol. 3, No. 3, July 1989, pp. 285-299. |
34. |
Rückert, K. J., "Design and Analysis with Strut-and-Tie Models – Computer-Aided Methods," IABSE Colloquium Stuttgart 1991: Structural Concrete, International Association for Bridge and Structural Engineering, Zürich, 1991, pp. 379-384. |
|
